24
Workmaster Lower Metal Shelf One Suspended or Pedestal Cabinet
Item
Description
Qty
1
Lower Metal Shelf 1 Suspended Cab
1
HARDWARE KIT HWR146
A
Bracket, Cab Footrest LMS
1
B
Screw, #14AB x .625 PPH SMS Black 2
C
1/4 Flat Washer
6
D
Bolt 1/4-20 x 1.00 Hex Head Black
2
E
Nut, Unistrut 1/4-20
2
F
Nut, 1/4-20 Hex Keps Black
2
G
Weld Stud 1/4-20 X .75 Right Angle 2
Step 1:
Install the unistrut nuts item E into the pedestal leg assembly channels by first aligning the nut with the
channel, then pushing it into the pedestal cross channel compressing the spring, then rotate the nut clockwise
and releasing it to lock into place. The unistrut nuts can be moved forward and backward to adjust to location
of the lower metal shelf in relationship with the front edge of the bench.
Step 2:
Install the weld studs item G, 1/4 flat washers item C, and 1/4-20 hex keps nuts item F into the cabinet
footrest LMS bracket as shown below on the right. Do not tighten the hardware. Attach the bracket assembly
to the side of the cabinet using the phillips screws item B and 1/4 flat washers item C. Be sure the weld studs
are positioned so that they will be in the lower slot of the b
racket when the bench is turned over onto it’s
pedestals. Tighten the phillips screws.
