10
Workmaster TE2 Electrical Channel
Item
Description
Qty
1
TE2 Electrical Channel
1
HARDWARE KIT HWR028
A
1/4-20 X .75 Hex Head Bolt
4
B
1/4 Flat Washer
4
Step 1:
Remove the 1/4-20 x .50 self-threading phillips screws that are installed in the back of the TE2 Electrical
Channel and use them to attach the TE2 mounting brackets as shown.
Please Note:
Maple Top Upgrades use a longer mounting bracket, same hardware and is found in HWR086.
Please Note2:
If your order also has SE2, SE3, or SE4 for your Instrument shelf please see page 17 of Part 2
before installing your TE-2 Electrical Channel.
Step 2:
Slide the TE2 Electrical Channel over the top of the back edge of the worksurface. Attach the TE2 mounting
brackets to the worksurface by threading the 1/4-20 x .75 hex head bolts with the 1/4 flat washers into the
inserts in the underside of the worksurface.
Step 3:
Tighten the 1/4-20 x .75 hex head bolts and then the 1/4 x .50 self-threading phillips screws while holding the
TE2 channel in place.
Note:
CAUTION: Risk of Electric Shock. Do NOT plug into another Relocatable power tap.
