15
Single Drawer
Item
Description
Qty
1
Drawer Hanger Bracket
1
HARDWARE KIT HWR015
A
1/4-20 Hex Keps Nut
4
B
1/4 Flat Washer
8
C
1/4-20X.75 Hex Head Bolt
7
D
1/4-20 Captive Retainer Nut
4
E
#14 X 1.00 PPH Screw
3
Note: Applies to all drawers and suspended cabinet configurations.
It is best to install drawer bracket and drawer(s) while bench in upside down.
Step 1:
Install rear mounting bracket to worksurface as shown on below using hardware listed above.
Note:
The position of your bracket will be determined by the size of your front beam.
Step 2:
Install the captive retainer nuts into the drawer mounting bracket and the bench front beam as shown below.
