33
i3PROJECTOR
manual 3303W UM
User Controls
Installation
33
User controls
3D
3D
Auto: When a HDMI 1.4a 3D timing identification signal is
detected, the 3D image is selected automatically.
Choose “On” to enable 3D function.
Choose “Off” to disable 3D function.
3D Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute “Invert” to get best match
of left/right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame Se-
quential”, and “Field Sequential”.
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D
glasses in the1080p @ 24 frame packing.
“Frame Sequen-
tial” is supported
the DLP Link 3D
input signals
from VGA / HDMI
connector.
“Frame Sequen-
tial” / “Field
Sequential” are
supported the
HQFS 3D input
signals from
Composite/S-
Video connector
connector.
“Frame Pack-
ing” / “Side-by-
Side(Half)” / “Top
and Bottom” are
supported from
HDMI 1.4a 3D
input signals.
