INSTALLATION
This function is designed to update firmware. Stop all camera
operations when you update firmware. Do not turn off power or
disconnect the internet connection during the firmware update
process. Click “Restart Camera” after you have updated firmware
successfully.
• Restart Camera – The camera is restarted without changing any
settings. Typically used after updating firmware. After clicking, a
pop up will appear asking you to confirm. Click Yes.
• Factory Default – Resets the camera to factory settings but keeps
the Network settings. After clicking, a pop up will appear asking
you to confirm. Click Yes.
• Hard factory default – Resets the camera to factory settings and
will cause all parameters (including the IP address) to be reset.
After clicking, a pop up will appear asking you to confirm. Click
Yes.
5.3.3 User
User List
Displays the list of users. Only two roles can be specified, administrator
(admin) and guest (viewer). If you want to delete a user, select a user
and then press the “Delete User” button.
27
