i3 International SAN iS316, User Manual

Page: 76 / 89

76
Level Type Description
INFO PD inserted Disk <slot> is inserted into system
WARNING PD removed Disk <slot> is removed from system
ERROR HDD read error Disk <slot> read block error
ERROR HDD write error Disk <slot> write block error
ERROR HDD error Disk <slot> is disabled
ERROR HDD IO timeout Disk <slot> gets no response
INFO PD upgrade started PD [<string>] starts upgrading firmware process.
INFO PD upgrade finished PD [<string>] finished upgrading firmware process.
WARNING PD upgrade failed PD [<string>] upgrade firmware failed.
INFO PD RPS started L2L Assign PD <slot> to replace PD <slot>.
INFO PD RPS finished L2L PD <slot> is replaced by PD <slot>.
ERROR PD RPS failed L2L Failed to replace PD <slot> with PD <slot>.
Hardware Events
Level
Type Description
WARNING ECC single Single-bit ECC error is detected at <address>
ERROR ECC multiple Multi-bit ECC error is detected at <address>
INFO ECC dimm ECC memory is installed
INFO ECC none Non-ECC memory is installed
INFO SCSI bus reset Received SCSI Bus Reset event at the SCSI Bus <number>
ERROR SCSI host error SCSI Host allocation failed
ERROR SATA enable device
fail Failed to enable the SATA pci device
ERROR SATA EDMA mem
fail Failed to allocate memory for SATA EDMA
ERROR SATA remap mem
fail Failed to remap SATA memory io space
ERROR SATA PRD mem fail Failed to init SATA PRD memory manager
ERROR SATA revision id fail Failed to get SATA revision id
ERROR SATA set reg fail Failed to set SATA register
ERROR SATA init fail Core failed to initialize the SATA adapter
ERROR SATA diag fail SATA Adapter diagnostics failed
ERROR Mode ID fail SATA Mode ID failed
ERROR SATA chip count
error SATA Chip count error
INFO SAS port reply error SAS HBA port <number> reply terminated abnormally
INFO SAS unknown port
reply error SAS frontend reply terminated abnormally
INFO FC port reply error FC HBA port <number> reply terminated abnormally
INFO FC unknown port
reply error FC frontend reply terminated abnormally
INFO Port linkup The Port <number> link status is changed to Up.
INFO Port linkdown The Port<number> link status is changed to Down.
EMS Events
Level
Type Description
INFO Power install Power (<string>) is installed
ERROR Power absent Power (<string>) is absent
INFO Power restore Power (<string>) is restored to work.
ERROR Power fail Power(<string>) is not functioning
WARNING Power detect PSU signal detection(<string>)
INFO Fan restore Fan (<string>) is restored to work.
ERROR Fan fail Fan (<string>) is not functioning