16
。
Using RS-232 cable for console (black color, phone jack to DB9 female) to connect from
controller to management PC directly.
。
Using RS-232 cable for UPS (gray color, phone jack to DB9 male) to connect from controller to
APC Smart UPS serial cable (DB9 female side), and then connect the serial cable to APC Smart
UPS.
CAUTION:
It may not work when connecting the RS-232 cable for UPS (gray color, phone jack to
DB9 male) to APC Smart UPS directly.
Attach the power cords and power on the system, and then power on the hosts and the iSNS server
(optional for iSCSI environment).
Start the configuration.
Power ON / OFF
Power on the System
The power button is located at the right
front handle. To turn on the system, you
may press power button once. After you
turn the power ON, the system performs
a booting process which takes a few
minutes.
CAUTION:
Be aware that when Controller Health LED is in RED, please DO NOT plug out the
controller from the system or turn off the power suddenly. This may cause
unrecoverable damage, which will not be covered by warranty.
Power off the System
If it becomes necessary to power down the system, it is recommended using a normal, controlled shutdown
form through either the LCM or Web UI to ensure all data is flushed from the cache first.
Shutdown using Web UI:
1.
Using the Web UI:
Select System Maintenance -> Reboot and Shutdown.
