7
Rev. 170322
i3-TRNG-CAMS-Ax47DC-UM.indd
2.2 Power
This camera supports PoE power only. IEEE 802.3af Class 3, max load of 8.5W.
Incorrect voltage may cause irreparable damage to the video camera and will
effectively void the camera warranty. For PoE power, insert the RJ45 cable into the
RJ45 jack on the camera’s cable. Connect the other end of the RJ45 cable to a
compatible PoE switch/hub/router.
2.3 Cleaning
•
For maximum optical clarity, the camera or lens must remain clean. Use a soft, dry
cloth to remove finger prints and dust from the dome cover.
•
Use a blower to remove dust from the lens.
•
Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a
small quantity of neutral detergent, then wipe dry.
•
Do not use volatile solvents such as alcohol, benzene, or thinners, as they may
damage the surface finish.
2.4 Servicing
To avoid electrical shock and to preserve the product warranty, DO NOT disassemble
the camera. Refer servicing to qualified personnel only.
2.5 Routine Maintenance
•
The dome bubble is an optical part. Use a soft and dry cloth to remove any
fingerprints and dust.
•
Clean the camera housing with a soft and dry cloth. For more stubborn marks, use
a cloth dampened with a small quantity of neutral detergent, then wipe dry.
•
CAUTION: Do not use volatile solvents such as alcohol, benzene or
thinners, as they may damage the surface finish.
