17
Rev. 170322
i3-TRNG-CAMS-Ax47DC-UM.indd
6.1 Hardware/Software Requirements
The following requirements must be met to achieve a successful network connection
with the Ax47DC IP camera.
SRX-Pro Server
•
i3 SRX-Pro Version 3.3.3 or higher
•
Latest GiPi adapter is installed. Latest i3 GiPi can be downloaded from:
http://i3international.com/software-downloads
.
Note:
SRX-Pro must be closed while GiPi updater is installed. After GiPi updater
installation, re-start i3 SRX-Pro Server software again.
•
Windows 7 Pro or 7e
•
Internet Explorer Version 8.0 or later, or latest-available Firefox
IE8 and IE9 Limitations: No Logs setup page, no firmware update functionality
(use Annexxus Configuration Tool, IE v.10 or later or Firefox to update camera
firmware).
•
CPU: Intel Pentium Core 2 or higher
•
Memory: 1GB or more
•
VGA card - supporting Direct X 9.0 or above
Power Supply
Your camera requires PoE power supply. Use a RJ45 network connector to connect the
camera to your computer or hub switch.
Note: Camera damages resulted from improper power application are NOT covered by
the camera warranty.
Switch
A Gigabit Switch is required to monitor two or more cameras from the same
SRX-Pro Server.
6.2 Configuring IE for Video Display
Your Internet Explorer (IE) v.10.0 or higher must first be configured in order to properly
display video stream from your Annexxus camera.
Follow these instructions to configure your Internet Explorer browser.
1. Enable Cookies
a)
In Internet Explorer window, click
Tools
>
Internet Options
b)
Open Privacy tab, move the slider to “
Low
” or “
Accept All Cookies
”
c)
Click
Apply
. Do not close the Internet Options window.
2. Adjust Internet Security Settings
a)
Open
Security
tab in the Internet Options window
b)
If the camera operates inside of the Intranet, click the
Local
intranet
icon;
If the camera operates outside of the Intranet, click the
Internet
icon.
