5
PUSH BUTTON SIMPLE CONNECT
Figure 2: Reset QCA7000
Figure 3: Pull down GPIO 3
•
Set the jumper for GPIO 3 in pull down position ( see Figure 3 ) for just 6 seconds and then quickly back ( see
Figure 1 )
•
Now the network membership key of the PLC Stamp micro EVB should be random
•
Trigger the pairing by pressing the simple connect button on the powerline adapter
•
Set the jumper for GPIO 3 in pull down position ( see Figure 3 ) for just one second and then quickly back (
see Figure 1 ) in order to trigger the pairing on the PLC Stamp micro EVB
Figure 4: LED for GPIO 0
•
The pairing process was successful if the GPIO 0 LED is permanent on ( see Figure 4 )
