3.2
... for electric vehicle charging systems
3
CONNECT THE BUNDLE ...
3.2
... for electric vehicle charging systems
Follow the following steps for both parts of the bundle.
1. Connect Duckbill 2 SPI via Ethernet with your computer
2. Set the jumper on PLC Stamp micro EVB
3. Connect PLC Stamp micro EVB with the control pilot wire
4. Connect PLC Stamp micro EVB with the computer via mini USB cable
5. Connect Duckbill 2 SPI via 20 pin ribbon cable with PLC Stamp micro EVB
6. Connect Duckbill 2 SPI to the PC via USB extension cable
