55
Alarm Output:
Check “Alarm output” and once the event triggers, the camera will linkage to alarm
output.
PTZ:
Check “PTZ” and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
Preset:
Setup the Preset point for the PTZ camera move to when the event is triggered.
Save:
Click “
Save”
icon to store the setting.
Smart Motion:
Click this button to setup smart motion, that will let the motion detection more
accurately.
Following the steps as below to setup the motion detection function..
1.
Check ”
Enable
” and select the value of sensitivity. The high value will get more sensitivity.
2.
Arming Schedule:
Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
3.
Select motion detection area from “
Area setting
” section. Press and drag the left button of Mouse
to setup the detection areas. You can setup multi region area number for each camera. Click
“Clear” bottom to clear the current detective areas.
4.
Target Percent:
Setup the minimum percentage ration (target size/ image area) of effective motion
detection targets. You can find out the blue mark after setup the target percent. Once the targets
Summary of Contents for ANYCAM DM-2MIPA 04 Series
Page 23: ...23...
