57
PTZ:
Check “PTZ” and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
Preset:
Setup the Preset point for the PTZ camera move to when the event is triggered.
Save:
Click “
Save”
icon to store the setting.
Face Detection (Option):
Click this button to setup the parameters.
Following the steps as below to setup the motion detection function..
1.
Check ”
Enable
” and select the schedule of Face detection.
2.
Arming Schedule:
Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
3.
Select the Detection areas or Shield area from “Area type” section, then press and drag the left
button of Mouse to setup the area. Click “Clear” bottom to clear the current detective areas.
4.
Minimum Pixel:
Setup the minimum pixels of face detection, the system will ignore when the
pixels less than the setting number.
5.
Capture Mode:
Setup the face detection mode.
6.
Check “
Enable FTP
“ icon will send out the snapshot to FTP server.
Summary of Contents for ANYCAM DM-2MIPA 04 Series
Page 23: ...23...
