62
the stream at the same time by requesting a copy from the multicast group address Therefore,
enabling multicast can effectively save Internet bandwidth. The ports can be changed to values
between 1025 and 65535.
The multicast RTP port must be an even number and the multicast RTCP port number is the
multicast RTP port number plus one, and thus is always odd.
If the multicast RTP video ports are incorrectly assigned, the following warning message will be
displayed.
DDNS Settings:
Click this button to setup DDNS configuration.
The DDNS is implemented through a dynamic domain resolution server. It requires a PC running in
the server with fixed IP address on the Internet. IP Camera DDNS settings interface as above figure.
DDNS:
Click this button to setup the DDNS function, there are three default DDNS server for the
user choice. If your IP Camera is set to use PPPoE as its default network connection, you can use
the Dynamic DNS (DDNS) for network access. Before you start, please registration on the DDNS
server is required before configuring the DDNS settings of the IP Camera. Please do the process to
setup the DDNS.
1.
Enable DDNS:
Check “
Enable DDNS
“ icon to use the DDNS function.
2.
DDNS Type:
Select DDNS server type (There are Dyndns/ PeanutHull/NO-IP/ 3322/
DnsDynamic five servers selectable), or entry the
Server Address.
3.
Entry the
Port number (default is 80). User name/Password and confirm the password again.
Summary of Contents for ANYCAM DM-2MIPA 04 Series
Page 23: ...23...
