Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Installation for standalone KVM
Screw A: 2 pcs
Screw B: 8 pcs
ff
@P
M3.2x4.5mm
M4x 10 mm
Install each bracket using screws
provided shown in
Figure 1.
Fix the KVM into the rack
