I-Tech MAG2000, User Manual

Page: 22 / 32

I.A.C.E.R. Srl 22 MNPG52-04
26.
Treat. 20 Hz 20 free free 24 hours
27.
Treat. 30 Hz 30 free free 24 hours
28.
Treat. 40 Hz 40 free free 24 hours
29.
Treat. 50 Hz 50 free free 24 hours
30.
Treat. 60 Hz 60 free free 24 hours
31.
Treat. 70 Hz 70 free free 24 hours
32.
Treat. 80 Hz 80 free free 24 hours
33.
Treat. 90 Hz 90 free free 24 hours
34.
Treat. 100 Hz 100 free free 24 hours
35.
Autoscan* * 2 - 6 20 24 hours
*Autoscan program allows to adjust the desired therapy time then
it will start automatically a frequency cycle from 10 Hz to 100 Hz
with a time therapy of 5 minutes for each frequency. It’s an ideal
program for the regeneration of both hard tissues (bones) and soft
tissues (tendons, ligaments) in the same treatment.
Therapy duration values are recommended by I.A.C.E.R. S.r.l. however
the user can adjust the time as he prefers. MAG2000 uses therapy time
values, working frequency values and field intensity values coming from
scientific and medical literature, as result of well known sperimentations
and clinical evaluations (Barker - Lunt 1983, Bassett – Pawluk – Pilla
1974, Bassett - Valdes – Hernandez 1982).
Set up ( language selection)
Move the ON/OFF switch, placed on device upper side, to the ON
position. Immediately after keeping pressed the button until the
language list appears on the display. Release the button: select the
chosen language by using the buttons.
Press OK key to confirm your selections.