I.A.C.E.R. Srl
11
MNPG52-04
•
Take care of position and meaning of the labels on MAG2000;
•
Do not damage the therapeutic belt acting on connection cable and
avoid to roll up the cable around the belt or the device;
•
Check the integrity of the power supply before use. Avoid the use in
case of damage to the case or to the wire;
•
Avoid the use of MAG2000 to people not educated through the
reading of the manual;
•
Avoid the use of MAG2000 contemporary with ointments containing
free ions of magnetic metals;
•
Do not use the device in damp environments and/or in presence of
inflammable agents;
•
Do not wear metallic objects during therapy;
•
Take care to place the green side of the therapeutic belt on the skin;
•
Use only cables and applicators supplied by the Manufacturer.
Inadequate cables and applicators could damage the device and/or
could be hazardous for the patient;
•
The user must periodically verify cables and applicators insulation and
control their integrity (eventually by contacting the manufacturer).
•
Pay attention to use belt connexion cables and power supply:
strangulation danger.
•
The materials used for the device production had passed the toxicity
regulations. In case of allergic reactions please suspend the treatment
and consult a doctor.
•
Do not use on irritated skin or on open wound.
•
Do not connect the device and its accessories to other devices not
mentioned in the present user manual.
•
Keep it out of children and animal’s reach.
•
Avoid the device and accessories exposition to excessive direct light
and dust. Make reference to Maintenance paragraph.
•
In case of prolonged treatments (even up to 8 hours) we suggest to
use intensity lower than 50. In this case the efficacy is given by the
prolonged treatment time rather than maximum adjustable intensity;
•
High magnetic field intensity (higher than 80/100 Gauss) are
recommended for short treatments (up to 2 hours) or in presence of
rigid bandages/braces.
WARNING. Disconnect the power supply from the main after each
treatment.
The manufacturer is considered responsible of the performances,
reliability and safety of the instrument only if:
Summary of Contents for MAG2000
Page 31: ...I A C E R Srl 31 MNPG52 04...
Page 32: ...I A C E R Srl 32 MNPG52 04...
