5
Quick Start / USB 3.0 Charging HUB 10 Port
EN
INTRODUCTION
The HUB is an ideal companion for everybody who does not have enough USB
ports in his/her notebook, ultrabook or PC and who has to constantly connect and
disconnect his/her favorite USB equipment such as
fl
ash disks, mobile phones,
tablets, digital cameras, MP3 players, printers, etc.
This HUB offers
10 USB 3.0 ports
with the
Plug & Play function
and
standard
USB charging
– the HUB will automatically detect connected equipment for USB
charging. As this HUB is equipped with 10 USB 3.0 ports, it can charge up to 10
devices at a time.
The USB 3.0 interface
is especially important for data transfers
from USB 3.0 memory cards and
fl
ash drives, where its high transfer rate is
most used. In the packing is included
also an external power adapter,
which is
essential for the HUB. The power adapter guarantees the USB charging stability
and HUB performance.
This HUB
does not require installation of drivers
. You will just connect it by the
USB cable to your computer and immediately you can start using it. This HUB
has
a built in overcurrent protection
of your computer in case of short connection on
the peripheries. The interface
is compatible
with USB 2.0 / 1.1.
INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10, MAC OS X 10.6 AND HIGHER,
LINUX, CHROME OS
The HUB is installed automatically, no need install drivers. Connect the connec-
tor of the power adaptor to the HUB and connect the power adaptor to a socket
outlet with 230V. Then plug the HUB via USB cable into available USB port (USB
3.0, 2.0 or 1.1 standard) of your notebook / PC and follow the on-screen instruc-
tions. The HUB will be installed and displayed in Device manager as “Generic USB
Hub” and “Generic USB SuperSpeed Hub”.
1
2
5
4
3
