SPECIFICATION
ź
External USB 3.0 case for M.2 B-Key SATA Based
SSD (NGFF) discs
ź
Transferrable interface: 1x USB 3.0
ź
Compatible with M.2 B-Key SATA Based SSD
(NGFF) discs with sizes 2230, 2242, 2260, 2280
ź
Reversely compatible with USB 2.0 interface
ź
It supports the transfer rates: SuperSpeed
(5 Gbps) / HighSpeed (480 Mbps) / FullSpeed
(12 Mbps) / LowSpeed (1.5 Mbps)
ź
It supports the Plug & Play function
ź
Active LED diode indicating the case state (lights –
is connected, twinkles – record/reading is going
on)
ź
Power supply 5V, 900mA
ź
Weight: 44 g
ź
Dimensions: 110 x 40 x 9 mm
SYSTEM REQUIREMENTS
ź
Windows XP/Vista/7/8/8.1/10 32/64bit, Mac OS
10.x and higher – automatic installation of drivers
from the system
ź
A free USB port (in order to ensure maximum
usage of the M.2 disc's speed, we recommend a
free USB 3.0 port).
M.2 DISC HARDWARE INSTALLATION
Go on according to the following instructions:
1) Screw out 2 pcs of screws on the connector side of
the case and take off the cover.
2) Take out the motherboard.
3) Insert M.2 disc so that the slot in the disc
corresponds to the slot on the M.2 connector. After that,
screw up the M.2 disc on the opposite side to the
motherboard. Insert the motherboard together with the
M.2 disc back and screw up the pair of the screws.
4) Connect a USB cable to the case. Now the device is
ready for using.
i-tec MySafe USB 3.0 M.2
ENGLISH
EN
03