i-PRO WV-X35000 Series, Installation Manual

Page: 7 / 120

Standard accessories
Important Safety Instructions ............................. 1 pc.
RJ45 waterproof
connector cover
・
cap 1×
Waterproof rubber A
(Black) 1× Waterproof rubber B
(White) 1×
Bit 1× (Hex wrench,
screw size 6.35 mm
{1/4 inches} T10)
Template 1×
RJ45 Ethernet cable
for easy kitting*
1
1×
*1 The RJ45 Ethernet cable for easy kitting is attached to the camera.
Other items that are needed (not included)
⿟
Mounting screws
Installation method Recommended screw
*1
Minimum pull-out
strength
*2
Directly mount the camera onto the installation surface M4 × 16 mm {5/8
inches}*
3
× 2 pcs.*
4
196 N {44 lbf}
Mount the camera to a two-gangbox/junction box.
Mount the camera using the exclusively designed
mount bracket.
Refer to the operating instructions of each
bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this
case, wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the
minimum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust installation surface with a
thickness of 20 mm {25/32 inches} or more.
*4 Fix this product with two mounting screws basically. When the installation surface is not flat and the
fixing of this product is unstable, fix it with three mounting screws.
⿟
Ethernet cable with M12 (male) plug (category 5e or better, straight, less than 100m {328 feet})
35x02M
⿟
Ethernet cable with RJ45 plug (category 5e or
better, straight, all 4 pairs (8 pins),
less than 100m {328 feet})
35x02 32x02
32x02
35x02 35x02 35x02
≤40 mm
{1-9/16 inches}
13 mm {1/2 inches}
9 mm
{11/32 inches}
Straight section
≤30 mm
{1-3/16 inches}
32x02
7