7
• The ventilation openings are located on the
side of the camera.
To maintain the dehumidification function
properly, do not caulk (fill gaps with seal-
ants or other materials) the gaps between
the decorative covers.
Ventilation
opening
(4 places)
We shall not be liable for content compen-
sation, losses of recorded or edited con-
tent and any direct or indirect consequent
damages caused by failure to record or
edit due to faults with this unit or the
microSD memory card. In addition, the
same provisions apply after unit is reparied.
About the CMOS image sensor
• When continuously shooting a bright light
source such as a spotlight, the color filter
of the CMOS image sensor may become
deteriorated and this may cause discolor-
ation. Even when changing the fixed
shooting direction after continuously
shooting a spotlight for a certain period,
the discoloration may remain.
• When shooting fast-moving subjects or
performing panning/tilting operations,
objects crossing the shooting area may
look to be bending askew.
Cleaning this product body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury.
Do not use benzine, thinner, alcohol, or any
other types of solvents or detergents.
Otherwise, it may cause discoloration. When
using a chemical cloth for cleaning, read the
caution provided with the chemical cloth
product.
• Do not loozen or remove screws unless
instructed to do so in the product docu-
mentation.
• The camera position may be moved inad-
vertently while cleaning the camera body.
Restart the product or refresh the camera
position (position refresh) to correct the
camera position. Refer to the Operating
Instructions for further information.
Cleaning the lens
Use a lens cleaning paper (used to clean cam-
era lenses or lenses of spectacles). When using
solvent, use an alcohols solvent and do not
use a glass cleaner or a thinner.
Cleaning of the dome cover
Use lens cleaning paper (used to clean camera
or spectacles lenses) to remove any dirt on the
dome cover. (If dust or the like is adhered at
this time, the dome cover may get scratched.
We recommend rinsing for stubborn stains.)
Consumable parts
The following are consumables: Replace them
in accordance with their operating lifetimes.
Their operating lifetimes vary depending on the
usage environment and conditions. The oper-
ating lifetimes below are just guides for when
using the camera at +35 °C {95 °F}.
Lens unit, panning motor, tilting motor, slip ring,
flat cable for tilting: Approx. 3.7 million opera-
tions (Approx. 20000 hours)
* When continuing the action of moving the
set position for a long period, dust may
accumulate in a slip ring. It can be
prevented by executing the position refresh
action regularly (about once a week) using
the schedule setting.
Refer to our technical information website
<Control No.: C0125>) for slip ring information.
