6
When the product is accessible from the
Internet
To prevent unauthorized access, note the fol-
lowing.
• Leave user authentication turned on.
• Periodically change passwords that are
used to access the product.
Refer to the Operating Instructions for
information about how to change pass-
words.
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Do not expose this
product to direct heat sources such as a
heater.
<WV-S65301-Z1S>
When installing over oceans or in coastal
streets
• Periodically inspect the camera when
installing it in coastal areas or areas that
are sprayed with snow-melting agent.
(Replace parts as necessary.)
• When installing this product in coastal
areas and area that are sprayed with
snowmelting agent that are not exposed to
rainwater, periodically clean by rinsing to
remove adhered salt.
Usage such as switching the power ON/
OFF frequently could lead to failure of the
camera.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble.
Do not subject dome cover to strong
impact.
Doing so may cause damage or immersion.
Do not directly touch the lens and dome
cover with your bare hands.
A dirty dome cover or lens causes deterioration
of picture quality.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around
2 minutes after the restart just as when the
power is turned on.
About the automatic status detection function
When this product malfunctions due to exoge-
nous noise, etc. for 30 seconds or more, the
product will automatically restart and will return
to normal state. When the product is restart,
initialization will be carried out as when the
power of the product is turned on. When the
product repeatedly resets, exogenous noise
level around the product may be high and that
may cause malfunction. Contact your dealer
for instructions.
Periodically images on the screen appear
to be distorted
When the camera is installed in a location
where it is subject to small vibrations (for exam-
ple, when it is installed near devices that
vibrate), images may appear distorted and
stretched lengthways. This phenomenon is a
characteristic of image pickup devices that use
CMOS sensors and is caused by the relation-
ship between the periodic movements of the
camera and the timing that the image sensor
reads images. This is not a problem with the
camera. To reduce the possibility of this phe-
nomenon occurring, install the camera in a
secure location.
About the ventilation opening
• This product has 4 ventilation openings to
keep the inside of the camera at a low
humidity level.
• Depending on conditions such as temper-
ature, humidity or the climate, condensa-
tion may form and it may take time to
dehumidify.
Precautions for use
