9
[2] Power supply terminal (12 V DC)/ Power cord plug (accessory)
Connect the output cable of the DC power supply to the power cord plug.
IMPORTANT:
• Be sure to use the power cord plug provided with this product.
• Be sure to fully insert the power cord plug into the power supply terminal (12 V DC).
Otherwise, it may damage the camera or cause malfunction.
• When installing the camera, make sure that excessive force is not applied to the power cable.
• Be sure to use an AC adaptor compliant with the Specifications (written in the indication label
on the upper side of this unit) regarding power source and power consumption.
[3] Audio input connector
Connect a microphone or the line out of an external device using a stereo mini plug (ø3.5 mm).
<For microphone input>
• Recommended microphone (locally procured): Plug-in power type
(Sensitivity of microphone: –48 dB ±3 dB (0 dB=1 V/Pa,1 kHz))
•
Input impedance:
Approx. 2 kΩ (unbalanced)
• Supply voltage:
2.5 V ±0.5 V
• Recommended cable length:
Less than 1 m {3.28 feet}
<For line input>
• Input level for the line input:
Approx. –10 dBV
• Recommended cable length:
Less than 10 m {32.8 feet}
[1] Network connector (RJ45)
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network connector.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply,
12 V DC will be used for power supply.
•
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
