5.2 Using the Maintenance Screen
5.2.1 Confirming the coaxial - LAN converter’s Status
You can confirm the information in the table below, such as the firmware version, MAC
address of the coaxial - LAN converter, and the connection status of other coaxial - LAN
converters on the [Status] screen.
1.
Access the maintenance screen of the coaxial - LAN converter.
2.
Click [Status].
The screen shown above is the maintenance screen of the receiver side unit.
IMPORTANT
•
The screen shown here depicts the screen shown when accessing a receiver
side unit. The screen displayed for the receiver side unit and camera side unit is
different. [PLC link status] and [MAC address of the Master] are displayed on the
camera side unit’s screen.
Items
Description
Boot version
Displays the coaxial - LAN converter’s boot version.
Firmware version
Displays the coaxial - LAN converter’s firmware version.
Operation mode
Displays the coaxial - LAN converter type (receiver side unit or
camera side unit). Camera side units are displayed as [Terminal],
and receiver side units are displayed as [Master].
MAC address of the
PLC adaptor
Displays the MAC address of the connected coaxial - LAN
converter.
Other master
Indicates whether other receiver side units exist on the network.
If other receiver side units exist on the network, [Detected] is
displayed, if they do not exist, [Not Detected] is displayed.
Communication performance may be affected if other receiver side
units are detected.
PLC link status (only
displayed for the
camera side unit)
Displays the status of the connection between the camera side unit
and receiver side unit. [Connected] is displayed when there is a
connection, and [Disconnected] is displayed when there is no
connection.
48
Operating Instructions
5 Maintenance Screen of coaxial - LAN converter
