5.
Select [Use the following IP address], then click [OK] after entering the IP address
(
192.168.249.***
) and Subnet mask (
255.255.255.0
). Substitute “***” in
“192.168.249.***” with any number between 1 and 254 other than 249 (this is the
address assigned to the receiver side unit).
•
If an IP address has already been set, make a note of the current IP address and
other settings so that you can return the computer to those settings after you
have connected and configured the unit.
6.
Click [Close] to exit the [Local Area Connection Properties] screen.
IMPORTANT
•
The procedure for changing the IP address may change depending on whether
the viewing method or Windows 7 is set to [Large icons] or [Small icons]. Refer
to the help file supplied with the operating system for more information.
44
Operating Instructions
5 Maintenance Screen of coaxial - LAN converter
