Note
•
When mounting the receiver side units, make sure to connect a unit to both
the left and right ends of the underside continuous connecting bracket.
•
The BY-HCA10A rack mount bracket comes with 2 underside continuous
connecting bracket and 32 screws (flat-head: M3
´
6 mm {1/4 inches}). When
connecting 3 units together, use 1 underside continuous connecting bracket
and 12 screws (flat-head: M3
´
6 mm {1/4 inches}). Keep the remaining parts.
•
Connecting 4 receiver side units
(Recommended torque 0.7±0.3 N·m {0.52±0.22 lbf·ft})
Flat-head (M3
´
6 mm {1/4 inches}:
Rack mount connecting fitting (accessory))
´
16
Underside continuous
connecting bracket
(Rack mount connecting
fitting (accessory))
Note
The BY-HCA10A rack mount bracket comes with 2 underside continuous
connecting bracket and 32 screws (flat-head: M3
´
6 mm {1/4 inches}). When
connecting 4 units together, use 1 underside continuous connecting bracket and
16 screws (flat-head: M3
´
6 mm {1/4 inches}). Keep the remaining parts.
28
Operating Instructions
3 Mounting the Unit
