eagle . The details please check the illustrate .
The charging voltage of battery type
Battery Type
Bulk Voltage
Floating Voltage
12V
24V
48V
12V
24V
48V
Vented
14.2V
28.6V
57.2V
13.2V
26.4V
52.80V
Sealed
14.2V
28.6V
57.2V
13.4V
26.8V
53.60V
Gel
14.2V
28.6V
57.2V
13.7V
27.40V
54.80V
NiCd
14.2V
28.6V
57.2V
14.0V
28.0V
56.0V
Other
user-defined
(Set by the microcomputer software)
In the case battery type is not set , use the default battery type (Gel battery).
5.2.3 The voltage of DC load system and Max current :
This controller had added DC load output function , the output voltage range based on
the type of battery bank system . Like the battery bank voltage is 48V , DC output
voltage range will be the range of 48V battery bank working voltage .
1) How to turn DC output turn on/off ?
Please find the DC output control through MPPT or Solar Eagle software . It have 6
way to control it : ON Mode / OFF Mode / Time Control Mode /PV Volt Ctrl /
PV&Time Ctrl : Details please check the Setting ;
2) How to set the low voltage protection of DC output ?
This controller have low voltage protection ,the magnitude of low voltage protection
Could be set based on customer’s need . Factory settings is 10.5 V for 1 battery .If the
DC output is under the State of providing power for load ,then when the voltage under
the magnitude of low voltage protection , the DC output will stop provide power for
load . When the voltage of battery is recover to 0.5V bigger the magnitude of low
voltage protection ,it will restart . For 48V system , if the DC output under on mode ,
then when the battery bank will stop provide power under 42V , it will restart when
the voltage recover to 42.5 V .
3) Max DC output current
Then Max DC output current is 50A , if the output current out the rated current ,the
built-in fuse will be burn . We provide 2 fuse as back up ;
5.2.4 Specification for cable and micro-breaker
