4
I
NSTALLATION
The “i-Classic” speaker system can be installed with speakers attached or detached to the unit. There is no need
for speakers wires connection while the speakers are connected to the system. You will need to connect the
speakers wires when the speakers are detached to the unit for the speaker to work.
●
Detach the speakers from unit by sliding the latch away from the speaker and lift the back of the speaker
up and remove the speaker. Connect the supplied speakers wires with one end to back of the speakers and
the other end to the speakers jacks on the unit.
●
Attach the speaker to the unit by putting the front of the speaker into the area and place the back down
while sliding the latch away from the unit
●
Connecting jack of the power supply to the unit before plug into the wall outlet. Plug the power supply
into the wall outlet.
D
ESCRIPTION
OF
REMOTE
CONTROL
●
POWER
: turn on / off the unit
●
/ -
: for radio tuning up or down / for iPod® forward skip/searching or for backward skip/
searching
●
/ -
: adjust volume level up / down
●
PLAY/PAUSE
: to play iPod® / to pause iPod®
●
SET
: enter setting mode / save radio preset station
●
PRESET
: select radio preset channel
●
SLEEP
: select power on period
●
FUNCTION
: select operation mode
L
ISTENING
TO
iPod
1.
Insert a suitable Universal Dock onto the holder
2.
Insert the iPod® into the connector
3.
Once the iPod is placed in connector, the unit will charge the iPod until it is full.
NOTE: when the iPod® is inserted into the dock, weather the unit is on or off, the iPod is charged until it
is full.
4.
Press “PLAY/PAUSE” button to start playing.
5.
To listen through headphone, plug in headphone plug into the PHONES jack of the unit. The speakers will
be off when headphone are plugged in.
6.
Adjust volume through the unit or remote for desire volume level.
PAUSE iPod® PLAYBACK
Press “PLAY/PAUSE” button to pause / resume iPod® playback.
SKIP / SEARCH FUNCTION
Press /- button to skip to desired the song.
Press and hold /- button for forward or backward search.
S-VIDEO OUTPUT
If the iPod® has photo/video capability, and your TV has S-Video input, connect the unit to the external TV with
an S-Video cable (not included). The photos/videos from iPod® can be viewed on your external TV.
NOTES:
Make sure the power of unit and TV are off before making any connection
Make sure to go into the setting menu of your iPod® and set the TV Out to ON, otherwise, the photos/videos
from iPod® cannot be viewed on your external TV.
