I-CAN 2000T User Manual Download Page 27

Page: 27 / 37

WWW.I-CAN.TV

TV Settings

The TV Settings screen contains following options: TV Screen Format,

Display Format, TV SCART Output and Video Standard. Change the TV

Screen Format setting, if necessary. You may also change the default

Display Format value (Letter-box) to change the way the video is

transformed if the broadcast aspect ratio is different than the aspect ratio

of your TV. TV SCART Output lets you choose the format of the video

output signal for TV. Video Standard should be set to the standard used

in your country.

Read the descriptions that appear in the TV Settings screen before you

make a decision.

TV Settings

System Settings

The

System Settings screen contains some of the configuration

parameters you may change.

Default CA System - The Conditional Access system you use.

VCR SCART Output - Format of the video output signal for VCR.

Dolby Digital - If you use the Dolby Digital receiver (Home-Cinema

system), change the value of the Dolby Digital option to Yes.

Note: If you set this option to Yes, when the broadcast carries Dolby

Digital - no audio will be available at receiver’s TV & VCR outputs as

well as L/R audio outputs. Only Dolby Digital bit stream (AC-3) will

be available at Digital Optical Out.

Auto Upgrade in Standby - When you switch your receiver into the

standby mode, the application checks whether a new software

version is available. If the new software version is detected, you will

be informed about the availability of the receiver’s upgrade once you

have switched your receiver into the operate mode. However, you

may switch the Auto Upgrade option to Yes. In this case the

receiver’s software will be upgraded automatically when the receiver

is in the standby mode.

Auto Upgrade in Operate - This option allows you to upgrade your

decoder when it is in the operate mode. You can set the Check Time

and Check Repeat of the upgrades search. At the specified time a

window will be shown informing you about that the search for

upgrades is about to begin. The search will be initialized if you press

the

button or after 1 minute. You can press

button to

cancel the search.

System Settings

Upgrade In Operate

Summary of Contents for 2000T






































Search results

Summary of Contents for 2000T

Reviews:

Related manuals for 2000T

Brands by name

Popular brands

I-CAN 2000T, User Manual

Search results

Summary of Contents for 2000T

Reviews:

Related manuals for 2000T

Brands by name

Popular brands