FEATURES OF YOUR HYUNDAI
1- 57
B710A01L-AAT
VENTILATION
To operate the ventilation system:
o Set the air intake control to the fresh air ( )
position.
o To direct all intake air to the dashboard vents,
set the airflow control to the face ( )
position.
o Adjust the fan speed control to the desired
speed.
B710B01A-AAT
Center Ventilator
The center ventilators are located in the middle
of the dashboard.
To change the direction of the airflow, turn the
control knob on the middle of the ventilator as
desired.
B710B01L
B710C01L
The side ventilators are located on each side of
the dash board. The side vent knobs control the
amount of outside air entering the vehicle through
the side vents. These vents can also be
closed,so no air enters through the side vents.
To change the direction of the air flow, turn the
control knobs as desired.
B710C01Y-AAT
Side Ventilator
B700A01L-AAT
BI-LEVEL HEATING
Your Hyundai is equipped with bi-level heating
controls. This makes it possible to have cooler
air from the dashboard vents and warmer air
from the floor outlets at the same time. To use
this feature:
o Set the air intake control to the fresh air ( )
position.
o Set the air flow control at the bi-level ( )
position.
o Set the temperature control between "Cool"
and "Warm"
For normal heating operation, set the air intake
control to the fresh air ( ) position and the air
flow control to the floor ( ) position.
For faster heating, the air intake control should
be set in the recirculate ( ) position.
If the windows fog up, set the air flow control to
the "Def" (defroster) position. (The A/C will turn
on automatically and "Fresh" mode will be ac-
tivated.)
For maximum heat, move the temperature con-
trol to "Warm".