FEATURES OF YOUR HYUNDAI
1- 6
NOTE:
Once the system has been disarmed, it can
not be rearmed except by repeating the
arming procedures.
CAUTION:
Only the transmitter can disarm the armed
stage. If the transmitter is out of order at the
armed stage, it is necessary to take the
following steps;
1. Open the door by the key. In case of this,
the alarm will be activated.
2. Insert the key in the ignition key cylinder
and turn the ignition key to "ON" posi-
tion.
3. Wait for 30 seconds.
After completion of the steps above, the
system will be disarmed.
Keyless Entry System
Locking doors
1. Close all doors.
2. Push the " " button on the transmitter.
3. All doors will lock and the turn signal light
will blink twice to indicate that the system is
armed.
Unlocking doors
1. Push the " " button on the transmitter.
2. All doors will unlock and the turn signal light
will blink once to indicate that the system is
disarmed.
Operating the window (driver's only)
To open the window, push the " " button
on the transmitter for longer than 1 second after
all the doors are unlocked.
NOTE:
The transmitter cannot close the driver's
and passenger's windows.
Releasing the trunk lid
Push the " " button on the transmitter for
longer than 1 second.
B070E02HP-GAT
Replacing the battery
When the transmitter's battery begins to get
weak, it may take several pushes on the button
to lock or unlock the doors, and the LED will not
light. Replace the battery as soon as possible.
Battery type : CR2032
1. Separate the case with a blade screwdriver
as shown in the illustration.
HEF-192A
Screwdriver
2. Remove the old battery from the case and
note the polarity. Make sure the polarity of
the new battery is the same(+side facing
down), then insert it in the transmitter.
HEF-193
Battery
Replacement instructions: