Hyundai XG350 2003, Owner'S Manual, Page: 142 / 161

DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE
6-15
G290A02L-AAT
HEADLIGHT AIMING ADJUSTMENT HEADLIGHT AIMING ADJUSTMENT
HEADLIGHT AIMING ADJUSTMENT HEADLIGHT AIMING ADJUSTMENT HEADLIGHT AIMING ADJUSTMENT
Before performing aiming adjustment, make sure
of the following.
1. Keep all tires inflated to the correct pres-
sure.
2. Place the vehicle on level ground and press
the front bumper & rear bumper down sev-
eral times. Place vehicle at a distance of 118
in. (3m) from the test wall.
3. See that the vehicle is unloaded (except for
full levels of coolant, engine oil and fuel, and
spare tire, jack, and tools). Have the driver
or equivalent weight placed in driver's seat.
4. Clean the head light lenses and turn on the
headlights (Low beam).
5. Open the hood.
6. Draw the vertical line (through the center of
each headlight) and the horizontal line
(through the center of each headlight) on the
aiming screen.
G290A01L-1 WARNING: WARNING: WARNING: WARNING: WARNING:
The halogen bulb contains gas under pres- The halogen bulb contains gas under pres-
The halogen bulb contains gas under pres- The halogen bulb contains gas under pres-
The halogen bulb contains gas under pres-
sure and if impacted
sure and if impacted sure and if impacted sure and if impacted sure and if impacted could shatter, resulting could shatter, resulting could shatter, resulting could shatter, resulting could shatter, resulting
in flying fragments. Always wear eye pro- in flying fragments. Always wear eye pro-
in flying fragments. Always wear eye pro- in flying fragments. Always wear eye pro-
in flying fragments. Always wear eye pro-
tection when
tection when tection when tection when tection when servicing the bulb. Protect the servicing the bulb. Protect the servicing the bulb. Protect the servicing the bulb. Protect the servicing the bulb. Protect the
bulb against abrasions or scratches and bulb against abrasions or scratches and
bulb against abrasions or scratches and bulb against abrasions or scratches and
bulb against abrasions or scratches and
against
against against against against liquids when lighted. Turn the bulb liquids when lighted. Turn the bulb liquids when lighted. Turn the bulb liquids when lighted. Turn the bulb liquids when lighted. Turn the bulb
on only when installed in a headlight. on only when installed in a headlight.
on only when installed in a headlight. on only when installed in a headlight.
on only when installed in a headlight. Re- Re-
Re- Re-
Re-
place the headlight if damaged or cracked. place the headlight if damaged or cracked. place the headlight if damaged or cracked. place the headlight if damaged or cracked. place the headlight if damaged or cracked.
Keep the bulb out of the reach
Keep the bulb out of the reach
Keep the bulb out of the reach Keep the bulb out of the reach
Keep the bulb out of the reach of children of children
of children of children
of children
and dispose of the used bulb with care. and dispose of the used bulb with care. and dispose of the used bulb with care. and dispose of the used bulb with care. and dispose of the used bulb with care.
G270A02L
1) Horizontal line dimension from ground:
25.7 in.(654 mm.)
2) Distance between each vertical line:
49 in. (1,240 mm.)
And then, draw the parallel line at 0.8 in.
(21 mm.) place under the horizontal line.
7. Adjust each cut-off line of the low beam to
the parallel line with a phillips screwdriver -
VERTICAL AIMING
WARNING: WARNING:
WARNING: WARNING: WARNING:
Horizontal aiming should be adjusted by an Horizontal aiming should be adjusted by an Horizontal aiming should be adjusted by an Horizontal aiming should be adjusted by an Horizontal aiming should be adjusted by an
authorized Hyundai Dealer.
authorized Hyundai Dealer.
authorized Hyundai Dealer. authorized Hyundai Dealer.
authorized Hyundai Dealer.
G290B01L-AAT
Adjustment After Headlight Assembly Adjustment After Headlight Assembly Adjustment After Headlight Assembly Adjustment After Headlight Assembly Adjustment After Headlight Assembly
Replacement
Replacement Replacement Replacement Replacement
G290B01L
Vertical
line
Cut-off line
Ground line
Horizontal line
L
W
H
H
"P"
0.59 in. (15 mm)
0.83 in. (21 mm)