Hyundai WS 1868 FM, Instruction Manual

Page: 14 / 20

EN - 14
Thank you for purchasing the new generation electronic weather station. Designed and engi -
neered with the state-of-art technology and components, this instrument will provide accurate
and reliable measurement of air pressure with weather forecast, in/ out temperature and indoor
humidity and listen to FM radio broadcast. Read this manual carefully to full explore the features
and functions of the new product.
Name and Functions of Buttons:
Press Functions Hold 3 seconds
Clock Section:
SENSOR Select Channel 1,2,3 Delete current channel
SET Zone Time/ Home Time Enter clk & cal setting
ALARM Read alarm time 5 sec Alarm time setting
+ 1 step forward Fast advance
Alarm on/off
- 1 step backward Fast backward
C/ F R/C On/ Off
MAX/ MIN Read maximum/ minimum temperatures, humidity & air pressure
SNOOZE/ LIGHT Trigger snooze alarm & extended backlight
Barometer section:
BARO Nil Enter altitude setting
UP Select hPa/InHg altitude
Step forward for altitude level
DOWN Step backward for altitude level
Radio section:
RADIO Turn radio on and off
PRESET Preset selection of Ch 1- 8 Memorize the channel frequency
SLEEP Sleep timer 15, 30, 45, 60, 75, 90,105, 120 minutes
TUNING UP Frequency up
Select channel during channel memory setting
TUNING DOWN Frequency down
Select channel during channel memory setting
VOLUME Adjust volume level
RADIO/ BUZZER Select alarm mode (radio or beeping)
BATTERY INSTALLATION
Home Receiver Radio: Lift off the battery cover at the back, install 4 pcs AA batteries according
to the polarityindicated, close the battery cover.
The radio station and radio are powered by 2 pcs AA batteries seperately.
Remote Sensor: Lift off the bracket stand, loose the 2 screws with a small screwdriver, insert 2
pcs AAA batteries according to the polarity indicated. Replace the cover and tighten the 2 scre -
ws.
SETTING UP THE WIRELESS THERMOMETER:
For the first installation, always insert batteries to the home unit and then the remote sensor. Set
Channel 1 for the first remote sensor. Set channel 2 and channel 3 for the 2nd and 3rd sensor.
Press the Tx button on the back of remote sensor to verify the RF reception.
If more than 1 sensor is connected, press “CH” to select Ch1, Ch2, Ch3.
RADIO-CONTROLLED CLOCK
The unit will start synchronizing the clock after the 1st channel of the RF thermometer is registe -