GB
25 / 39
–
Never immerse the appliance into water or any other liquid (even its parts)!
– Avoid contact with the sealing wire when hot.
–
CAUTION
– Do not use the appliance with a program, time switch or any other part that
turns the appliance on automatically as there is a risk of fire if the appliance is not covered
or placed properly.
–
All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
–
WARNING
: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The producer does not undertake any responsibility for damage caused by improper use
of the appliance (e.g.
deterioration of food, injury, burning, scalding, fire, etc.
) and
its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.
USE OF THE APPLIANCE:
–
After completion of the vacuum process leave the cover of the
appliance open for the welding part to cool down.
–
CAUTION
–
The appliance is not designed for constant operation.
Do not use the welder constantly for longer than 15 minutes, then
leave it to cool down for approx. 10 minutes.
–
It is not intended for outdoors use.
–
The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion
(spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored).
– Prevent penetration of liquid inside the air exhaustion section
A4
!
–
Do not seal fluids in liquid state.
If you want to store liquid food (such as soups), first
freeze the food in an appropriate container, cut the food into pieces, put in bags and seal/
vacuum them. Put the individual bags into freezer.
– Do not place the appliance on unstable, fragile or flammable surfaces (e.g.
glass, paper,
plastic, wooden varnished boards and various fabric/table cloths
).
– Use the appliance in the working position only at places with no risk of turning over and in
sufficient distance from heat sources (e.g.
heater, stove, cooker, oven, grill
), flammable
objects (e.g.
curtains, drapes, etc.
) and wet surfaces (e.g.
sinks, wash basins, etc.
).
POWER CORD:
–
If the power cord of the appliance is corrupted, it has to be replaced
by the manufacturer, its service technician or a similarly qualified
person so as to prevent dangerous situations.
– Never put the power cord on hot surfaces and never let it hang over table edge or worktop
edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall
down, causing a serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
– Check the condition of the power cord of the appliance regularly.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.