35
Using the route menu
Routes
For route preview there is a route simulation in
the program. The route can be created in several
ways: in «Search» menu (to any of the items
on the map); from the current location to the
selected point; from any chosen point to another
point on the map.
•
[Go!]: In route guidance mode, this button
routes from point of the existing route to the
selected point. (All points between them will be
deleted.)
•
[Properties]: Properties of the selected
point. When you press the button additional
information appears.
•
[Set start]: The point is becoming the start of
the current route, the GPS-receiver when it is
necessary to disable.
•
[Route through]: Add point between two existing
points. The last added point will become the
second priority point on this route.
•
[Set finish]: Point is added in the end of the
route as it’s continue.
•
[Copy]: Copies the coordinates of the selected
point.
Auto routing
This function only works on those maps, that
contain information to set the route. To set the
route automatically from your current position,
tap on map and in appeared menu choose
[Cursor], and then [Go!]. Pay attention: on maps,
that do not contain information to set routes,
the route will look like a direct line of green
color, connecting your location and the point of
destination, ignoring all the buildings, roads, etc.
Route creation after searching resuIts
Go to the «Search» menu, find the required
object, that you want to route through, click
on it and in appeared menu select [Go]. When
you click on the “Information about the object’
will appear button [Route through]: add a point
between two points of an existing route, it will
become the second route point, and [Continue]:
the point is added to the end of the route,
continuing it. Both of these points are only
available in case, when there is an established
route on the map.
Manual route creation
This type of route is the same automatic, as the
first two, with only one difference - here you
can specify the point of departure and point of
arrival.
To create a route, click on the map to create the
first route point. At the bottom of the screen
select [Cursor], in “Properties”- the [Set start].
Then find the final point of the route and
press button [Cursor]>[Go!]. If map contains
information for automatic routing, the route
will be created on the basis of this data, and
will be the shortest by the time or the distance.
Otherwise, the route will connect the points of a
route using straight lines.
Using the route menu
PIO JS CIS ENG MFLXXXXXXXX.indd 35
PIO JS CIS ENG MFLXXXXXXXX.indd 35
2017-11-24 3:42:02
2017-11-24 3:42:02
