30
Getting started with navigation
Zoom in / Zoom out
To set the zoom level on the map screen, turn
the right knob clockwise/counterclockwise.
Map interface (Program interface
when routing)
1. In the main menu, press [Find] > [History].
2. Press [ ] of the desired item.
•
[Go!]: Marks the current position on the
map as the end of the route.
•
[Set start]: Mark becomes the start point
on the route. You should turn off your
GPS/GLONASS receiver.
•
[Route through]: Mark becomes the middle
point of the route.
•
[Set finish]: Mark on the map becomes the
end of the route. And previous end of the
route becomes the middle point.
Navigation volume
1. Press [
] on the map screen.
2. Press [Settings].
3. Set the guidance volume of navigation.
Scrolling the map screen
Drag and drop the map screen to the desired
direction, then touch the desired point.
Information on the point is displayed on the
screen. It can be used as an electronic map.
1
2
3
1. Cursor
Shows the mark menu.
2. Save WP
Saves current
3. Mark on the map
You can set the mark by tapping on the map.
You can save this mark as a waypoint, add it
to the route or see object's characteristics
the mark was set on.
PIO JS CIS ENG MFLXXXXXXXX.indd 30
PIO JS CIS ENG MFLXXXXXXXX.indd 30
2017-11-24 3:42:02
2017-11-24 3:42:02
