![background image](http://html1.mh-extra.com/html/hyundai/si-267/si-267_instruction-manual_2196577035.webp)
ENG - 35
ENG
CLEANING AND MAINTENANCE
Before every maintenance, unplug the iron from power supply by taking the fork of the
power cord out of the socket! Do not use rough and aggressive detergents (e.g. sharp
objects, peelers, pot scourers, caustic agents for cleaning or other solvents).
Wipe the
entire iron with a wet cloth in the cooled state and dry up. If brown film is created on the ironing
plate (e.g. when ironing starched laundry), you can remove the film by a detergent containing
fine sand. The iron is equipped with a permanent decalcification system
ANTI CALC
that does
not require maintenance. But the system cannot fully prevent creation of calcareous sediments.
Wipe the outside housing with a damp cloth and polish with a dry one. Do not use abrasives or
harsh cleaners as they may damage the surface of the iron.
ANTI-CALC SySTEM
A special resin filter inside the water reservoir softens the water and prevents scale build-up in
the plate. The resin filter is permanent and does not need replacing. However, please note that
the anti-calc filter will not completely stop the natural process of lime scale build-up.
TROUBLESHOOTING
Problem
Possible cause
Solution
The iron is plugged in but the
soleplate is cold.
There is connecton problem.
Check the main cord, the plug
and the wall socket.
The iron does not produce any
stream.
There is not enough water in
the water tank.
Fill the water tank.
The stream kontrol has been
set to positron „OFF“
Set the stream control to
higher position.
The iron is not hot enough.
Selectan ironing temperature
that is suitable for stream
ironing. Put the iron on its heel
and wait until the amber pilot
has gone out before you start
ironing.
Water droplets drip onto the
fabric.
The cap of the filling opening
has not been closed properly.
Close the cap properly. You
will hear a click
Flakes and impurities come
out of the soleplate during
ironing.
You have been using hard
water, which has caused
scale flakes to develop inside
soleplate.
Use the self- clean function
a few times.
Red light blinks and warning
sound beep.
The safety shut-off function
has switched the iron off.
Move the iron to deactivate
the safety shut-off function.
TECHNICAL SPECIFICATIONS
- Steam iron
- Ceramic soleplate
- Self cleaning
- Anti-Calc function
- Anti-drip system to prevent water escaping
from the soleplate
- Dry/steam/spray, variable steam, vertical
steam
- AUTO - SHUT OFF safety electronics for
automatic shut off
- Large 300 ml water tank, water fillbeaker
- Funnel for easy water filling
- Color: blue/white
- Power supply 230 V ~ 50 Hz
- Power drain 2200 W
- Size 29 x 13,7 x 11,7 cm cm,
- Weight: 1,18 kg
-
Protection class of the appliance I.
Summary of Contents for SI 267
Page 46: ...Pozn mky Notatka Notes...
Page 51: ...Pozn mky Notatka Notes...