background image

Driving your vehicle

34

5

CAUTION

• If the ABS warning light is on

and stays on, you may have a
problem with the ABS. In this
case, however, your regular
brakes will work normally.

(Continued)

(Continued)
• The ABS warning light will

stay on for approximately 3
seconds after the ignition
switch is ON. During that time,
the ABS will go through self-
diagnosis and the light will go
off if everything is normal. If
the light stays on, you may
have a problem with your
ABS. Contact an authorized
HYUNDAI dealer as soon as
possible.

W-78

CAUTION

• When the brakes are operated

continuously on the road hav-
ing poor traction, the ABS will
be continuously active and
the ABS warning light may
illuminate.

• Restart the engine. If the ABS

warning light is off, then your
ABS system is normal.
Otherwise, you may have a
problem with the ABS. Contact
an authorized HYUNDAI dealer
as soon as possible.

Summary of Contents for SANTA FE 2013































































































































































































































































































































































































































































































































































































































Reviews: