Features of your vehicle
208
4
VOICE RECOGNITION
Using Voice Recognition
Starting Voice Recognition
Shortly press the
key on the
steering remote controller .Say a
command
If prompt feedback is in [ON], then
the system will say “Please say a
command after the beep (BEEP)”
• If prompt feedback is in [OFF], then
the system will only say “(BEEP)”
•
To change Prompt Feedback
[On]/[Off], go to
[System]
[Prompt Feedback]
✽
✽
NOTICE
For proper recognition, say the com-
mand after the voice instruction and
beep tone.
Skipping Prompt Messages
While prompt message is being stat-
ed Shortly press the
key on the
steering remote controller (under 0.8
seconds)
The prompt message is immediately
ended and the beep tone will sound.
After the “beep”, say the voice com-
mand.
Re-starting Voice Recognition
While system waits for a command
Shortly press the
key on the
steering remote controller (under 0.8
seconds)
The command wait state is immedi-
ately ended and the beep will sound.
After the “beep”, say the voice com-
mand.
SETUP
Summary of Contents for SANTA FE 2013
Page 6: ......
Page 270: ...4 175 Features of your vehicle CD Player AM1B2DMKN AM1B3DMAN ...
Page 560: ...Maintenance 70 7 Engine compartment fuse panel ONCNMC2036 ONCNMC2015 ...
Page 596: ...Index I ...