manualshive.com logo in svg

Hyundai SANTA FE 2013, Owner'S Manual, Page: 526 / 606

Share
Download
Hyundai SANTA FE 2013 Owner'S Manual Download Page 526

Maintenance

36

7

WARNING 

- Brake fluid

When changing and adding
brake fluid, handle it carefully.
Do not let it come in contact
with your eyes. If brake fluid
should come in contact with
your eyes, immediately flush
them with a large quantity of
fresh tap water. Have your eyes
examined by a doctor as soon
as possible.

CAUTION

Do not allow brake fluid to con-
tact the vehicle's body paint, as
paint damage will result. Brake
fluid, which has been exposed
to open air for an extended time
should never be used as its
quality cannot be guaranteed. It
should be disposed of properly.
Do not put in the wrong type of
fluid. A few drops of mineral-
based oil, such as engine oil, in
your brake system can damage
brake system parts.

Summary of Contents for SANTA FE 2013































































































































































































































































































































































































































































































































































































































Reviews:

No comments