S243X / S243A
Multi Function 2D/3D Wide Monitor
25/31
FUNCTION
•
PC ANALOG, DVI, COMPONENT MODE and HDMI MODE
INPUT SELECT
To switch between current source and other
input source. (VGA/ COMPONENT/ DVI/ HDMI)
ASPECT RATIO
If you choose ASPECT RATIO on the OSD menu,
you can adjust the following.
- 16:10(Full); Shows full screen regardless of screen size.
- 16: 9; Displays image at 16:9 ratio.
- 4:3; Displays image at 4:3 ratio.
- 1:1; Displays image according to actual input pixels.
* 1900 x 1200 mode displays image to only 16:10 ratio
.
1600 x 1200 mode does not support image of 16:9 ratio
.
* When DCR function is set to On, BRIGHTNESS menu cannot be activated
.
You can control DCR function only when
setting 16:10 aspect ratio
.
DCR (Dynamic Contrast Ratio)
To increase contrast ratio by on and off.
RTC (Response Time compensation)
To control response time by on and off.
DVI TO HDMI AUDIO (Only HDMI mode)
To enable audio of your monitor when using the DVI to HDMI cable connection.
3D
Press / buttons to set to “Virtual 3D, Side by Side or Off.
VIRTUAL 3D STEP
Stretch or reduce the distance between objects in virtual 3D mode. Adjust with – or +
button.
FUNCTION
INPUT SELECT
HDMI
ASPECT RATIO
16:10
DCR
OFF
RTC
ON
DVI TO HDMI AUDIO
OFF
3D
OFF
VIRTUAL 3D STEP
1 2 3
1920x1200 60Hz
HDMI
–
+
