![background image](http://html1.mh-extra.com/html/hyundai/s243a/s243a_user-manual_2196766010.webp)
S243X / S243A
Multi Function 2D/3D Wide Monitor
6/31
5. 3D Monitor Setting Guide
Optimal resolution for 3D viewing is 1920*1200/60Hz. If you run it on different
•
resolutions, its 3D effects can decrease.
Use signal input source at RGB under PC mode or DVI mode. DVI mode is
•
recommended.
For 3D viewing, go to 1:1 mode under Display Control of OSD MENU before viewing
•
it (Monitor Manual: see 25 page). Viewing on a different mode may decrease 3D
effects.
On 1:1 mode, the screen size changes according to the input resolution. It doesn’t
•
mean that it has some problems with it. It just operates 1:1 mode without scaling
the input signal.
Install the 3D Software. For details, see the Installation Guide.
•
6. Q&A for 3D Mode
There is something like oil stain on the monitor screen.
•
- It is due to interferences of light waves within the air layers between the surface
of LCD and the 3D filter. It is not defective.
3D stereoscopic images are seen as two separate images.
•
1. When you don’t wear 3D glasses enclosed Please use the 3D glasses.
2. When you view it away from visual angle.
- To view 3D stereoscopic imaging optimally, you’d better keep the distance of 60 cm.
- 1m from the monitor screen.
- If you exceed 75° out of the left/right visual angle or 10° out of the top/bottom
visual angle while viewing 3D images, you cannot enjoy 3D images properly. So
keep the visual angle as provided above.