EN
EN - 59
- Always insert either one type of memory media “ USB pen-drive “ or “SD/MMC card “ for
encoding.
-
Recording will be completed only entire song being encoded, if terminate the encoding
process intermediately, there is no track being recorded nor stored to the USB or SD/
MMC card
II) COPYING OF MP3 FILE
If putting a MP3 disc instead of a cd-disc, the system will copy the
fi
les to the USB or SD/MMC
card if press the “ Rec “ button (14). The operation procedures is same as cd encoding as
stipulate on above, and the system will switch to copying mode only if MP3
fi
le being read.
Remark:
- The system will create a “ fcopy “ folder and then store all copied track in it.
- If press the “ Rec “ button (14) during playback of USB or SD source, the file will copy from
USB to SD or SD to USB
-
Copying will be completed only entire song being copy, if terminate the copy process
intermediately, there is no track being recorded nor stored to the USB or SD/MMC card
B) CASSETTE ENCODING
1. Select to “ Tape ” mode from function selector (10) and then press the “ Rec “ button (14)
directly.
2. The LCD display (2) with show the word “
USB
“ or “
card
“ and “
“ & flashing, press “
Rec “ button (14) again to confirm and the system is starting the encoding mode.
3. Start playback of the cassette tape which the track you prepare to record.
4. After finish of recoding, press the “ Stop
” button (8) until the text on LCD (2) stop flashing
and return to “ Tape “ mode.
C) PHONO ENCODING
1. Press the Function button (10) to “ Phono “ mode and then press the “ Rec “ button (14)
directly.
2. The LCD display with show the word “
USB
“ or “
SD
“ and then flashing, and then display “
“ & “
“ and flashing after few seconds, press “ Rec “ button (14) again to confirm
and the system is starting the encoding mode.
3. Start playback at Phono for the track which you want to recording..
4. After finish of recoding, press the “ Stop
“ button (8) until the LCD stop flashing and return
to “ Phono “ mode.
TRACK SEPARATION (BY REMOTE HANDSET)
You can divide the recording music from phono or tape to USB/sd track by trace during
encoding. Every time when press the “
“ (track separation) button once at remote handset
during encoding from phono or tape to USB/SD, the system will generate a new track and
continuous the recording. The text “ phono “ or “ tape “ at LCD display (2) will
fl
ashing one time,
it mean the unit is creating a new track successfully.
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
The system is able to erase the
fi
le stored inside the USB pen drive or SD card by following:-
SINGLE FILE DELETE (BY REMOTE CONTROL)
1. Press “ Skip up
”
or “ down
“ buttons (26,12) to select the file going to delete
2. Press “ Delete “ button on remote and the LCD display (2) will show (delete track---001)
3. Press the “ Delete “ button again to confirm the deletion.
Remark : press “ Stop
” button (8) to exit delete mode anytime
