manualshive.com logo in svg

Hyundai Palisade 2020, Owner'S Manual, Page: 167 / 611

Share
Download
Hyundai Palisade 2020 Owner'S Manual Download Page 167

3-71

Con

v

enient f

eatur

es of y

our v

ehicle

3

Instrument Cluster Control

Adjusting instrument cluster
illumination

When the vehicle's position lights or
headlights are on, press the illumina-
tion control button to adjust the
brightness of the instrument panel
illumination.
When pressing the illumination con-
trol button, the interior switch illumi-
nation intensity is also adjusted.

• The brightness of the instrument

panel illumination is displayed.

• If the brightness reaches the maxi-

mum or minimum level, a chime
will sound.

For information regarding the illu-
mination setting on your audio dis-
play, refer to the "Setup" section of
your Audio or Navigation manual.

Gauges and Meters

Speedometer

The speedometer indicates the
speed of the vehicle and is calibrated
in miles per hour (MPH) and/or kilo-
meters per hour (km/h).

Never adjust the instrument
cluster while driving. Doing so
could lead to driver distraction
which may cause an accident
and lead to vehicle damage,
serious injury, or death.

WARNING

OLX2049049N

OLX2049139N

OLX2048102L

■

Type A and B

■

Type C

Summary of Contents for Palisade 2020




































































































































































































































































































































































































































































































































































































































Reviews:

No comments