Hyundai Palisade 2020 Owner'S Manual Download Page 29

Page: 29 / 611

2-12

Safety system of your vehicle

Lumbar support (4way) (for dri-
ver’s seat) (if equipped)

The lumbar support can be adjusted
by pressing the lumbar support
switch.
• Press the front portion of the

switch (1) to increase support or
the rear portion of the switch (2) to
decrease support.

• To move the support position up or

down, press switch (3) or (4).

Seatback pocket

The seatback pocket is provided on
the back of the front passenger's
seatback.

To prevent the Occupant
Classification System from mal-
functioning:
Do not hang onto the front pas-
senger's seatback.

WARNING

OLX2038013

Do not put heavy or sharp
objects in the seatback pockets.
In an accident they could come
loose from the pocket and
injure occupants.

CAUTION

Summary of Contents for Palisade 2020




































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Palisade 2020

Reviews:

Related manuals for Palisade 2020

Brands by name

Popular brands

Hyundai Palisade 2020, Owner'S Manual

Search results

Summary of Contents for Palisade 2020

Reviews:

Related manuals for Palisade 2020

Brands by name

Popular brands