Hyundai Palisade 2020 Owner'S Manual Download Page 184

Page: 184 / 611

3-88

Convenient features of your vehicle

High Beam Assist
(HBA) indicator light
(if equipped)

This indicator light illuminates :

• When the high-beam is on with the

light switch in the AUTO light posi-
tion.

• If your vehicle detects oncoming or

preceding vehicles, the High Beam
Assist (HBA) system will switch the
high beam to low beam automati-
cally.

For more details, refer to "High
Beam Assist (HBA) system" in this
chapter.

AUTO HOLD Indicator
Light

This indicator light illuminates:

• [White] When you activate the Auto

Hold system by pressing the AUTO
HOLD button.

• [Green] When you stop the vehicle

completely by depressing the
brake pedal with the Auto Hold
system activated.

• [Yellow] When there is a malfunc-

tion with the Auto Hold system.
If this occurs, have your vehicle
inspected by an authorized
HYUNDAI dealer.

For more details, refer to "Auto
Hold" in chapter 5.

Cruise Indicator Light

This indicator light illuminates:

• When the cruise control system is

enabled.

For more details, refer to "Cruise
Control System" in chapter 5.

SPORT Mode Indicator
Light (if equipped)

This indicator light illuminates:

• When you select "SPORT" mode

as drive mode.

For more details, refer to "Drive
Mode Integrated Control System"
in chapter 5.

AUTO

HOLD

Summary of Contents for Palisade 2020




































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Palisade 2020

Reviews:

Related manuals for Palisade 2020

Brands by name

Popular brands

Hyundai Palisade 2020, Owner'S Manual

Search results

Summary of Contents for Palisade 2020

Reviews:

Related manuals for Palisade 2020

Brands by name

Popular brands