Hyundai Palisade 2020 Owner'S Manual Download Page 199

Page: 199 / 611

3-103

Con

enient f

eatur

es of y

our v

ehicle

Items

Explanation

Forward Safety

• Active Assist: If selected, the system controls the vehicle and provides a warning when a colli-

sion is detected.

• Warning Only: If selected, the system provides a warning when a collision is detected.
• Off: Deactivates the system.

For more details, refer to the "Forward Collision-Avoidance Assist system" in chapter 5.

Lane Safety

To adjust the Lane Keeping Assist (LKA) function.
- Lane Keeping Assist
- Lane Departure Warning
- Off

For more details, refer to the "Lane Keeping Assist (LKA) system" in chapter 5.

Blind-Spot Safety

• Blind-Spot View
To activate or deactivate the Blind-Spot View.

For more details, refer to the "Blind-Spot View" in this chapter.

• SEA(Safe Exit Assistance)
To activate or deactivate the Safe Exit Assistance.

For more details, refer to the "Safe Exit Assistance" in chapter 5.

• Active assist

• Warning only

• Off

For more details, refer to "Blind-spot Collision-Avoidance Assist (BCA)" in chapter 5.

❈

The information provided may differ depending on which functions are applicable to your vehicle.

2. Driver Assistance

Summary of Contents for Palisade 2020




































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Palisade 2020

Reviews:

Related manuals for Palisade 2020

Brands by name

Popular brands

Hyundai Palisade 2020, Owner'S Manual

Search results

Summary of Contents for Palisade 2020

Reviews:

Related manuals for Palisade 2020

Brands by name

Popular brands