– Use the appliance in the working position only at places with no risk of turning over and
in sufficient distance from heat sources (e. g.
heater, stove, grill, etc.
), and wet surfaces
(e. g.
sinks, wash basins, etc.
)
– Do not switch on the appliance without ingredients in it!
– Use the appliance designed and supplied for this type only. Using another appliance can
represent a risk for the operator.
– Do not combine the appliance (beaters
B
and hooks
C
).
– Do not insert the appliance into any body holes.
– Do not remove the appliance if the drive unit is in operation!
– Make sure that the power supply cable does not get between the rotating parts of the
accessories.
– The work adapters cannot be exchanged when the drive unit is in operation for safety
reasons.
–
The maximum time of processing is 10 minutes. Then wait for 15 minutes, which is
necessary for the drive unit to cool down.
– Check before every connecting of the appliance to power supply whether the switch
A1
is in the
0
position (off) and after completing work always disconnect the appliance from
power supply.
– Do not let children use the appliance without supervision!
– Do not process food at temperature exceeding
about 80 °C
.
– Never insert e.g.
fingers, fork, knife, spatula, spoon
into rotating parts of the appliance
and the accessories.
– If the processed food starts to stick to the appliance (e.g.
whipping beaters, kneading
hooks
), switch off the appliance and clean the accessories carefully using a spatula.
– Make sure that appliance does not hit walls of containers strongly when handling the beater.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
– Never use the appliance for any other purpose than for that described in these
instructions for use!
– The manufacturer is not responsible for damage caused by improper use of the appliance
and the accessories (e.g.
food deterioration, fire
) and its guarantee for the appliance
does not apply in situations when the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
(fig. 1)
A – drive unit
A1 –
speed selector/switch
A4 – power cord
A2 – TURBO button
A5 – release button (EJECT)
A3 – holes of the drive for connecting the accessories
B – whipping beaters
C – kneading hooks
III. PREPARATION FOR USE
Remove all packing material and take out the hand mixer and the accessories. Remove
all possible adhesion foils, stick-on labels or paper from the appliance. Before the first
use, wash the parts that will be in contact with food in hot water with a detergent, rinse
thoroughly with clean water and wipe till dry, or let dry (see
V. MAINTENANCE
).
GB
24 / 35
