![background image](http://html1.mh-extra.com/html/hyundai/hyuap610/hyuap610_instruction-manual_2195011025.webp)
ENG - 25
ENG
Automatic Operation
• The sensor monitor level of air cleanliness, automatically adjust air volume according to air
pollution level.
• The unit will not stop working even the LED indicates “
clean
” and work under “
quiet
” mode to
keep air fresh.
• According to indoor air volume, the air flow indicator will be light correspondingly.
• The clean indicator will blink 3 minutes even press “
Automatic Operation
” at the beginning.
• When the sensor is sensitive, recommend using „sleep“ operation or by pressing the airflow
switching button under „
manual
“ operation mode.
CLEANING AND MAINTENANCE
• During cleaning and maintenance, please turn off and unplug the device.
• Cleaning and maintenance every 2 to 3 months are recommended. If the device is exposed to
a higher extent of pollution, clean it more frequently.
Clean Machine Body
• Soak the fabric into dilution neutral detergent, wipe the
machine body after wringing. Please make sure there is
no scour remain on the surface, and use vacuum cleaner
to suck the dusk in the air inlet.
• Clean sensor hole entrance every month.
• The sensor’ s sensitivity will be unstable if the sensor hole
is polluted or jammed. Please use vacuum cleaner to suck
the dusk in the sensor holes.
A -
Odor Sensor
B -
Air Inlets
C -
Air Inlets
Clean Filter
• The combined high-performance Filter inside should be
cleaned every month. Remove the front cover and take out
filter (refer to page 26), use a vacuum cleaner to eliminate
dust on the filter and in the machine. Do not press hard
when cleaning the filter, do not damage the surface of
the filter, otherwise the effect of eliminating dust will be
reduced.
• After cleaning, please ensure that the parts are completely
dry before installing filter and front cover.