![background image](http://html1.mh-extra.com/html/hyundai/hyuap610/hyuap610_instruction-manual_2195011026.webp)
ENG - 26
REPLACE FILTER
Please turn off and unplug the device before cleaning and maintenance.
Replace period
• Air purification efficiency will be reduced after long-term use of HEPA filter, please replace filter
periodically. The replacement frequency depends on using method and place. In general, every
2 years replace 1 time.
• Please replace the filter without delay when filter replace indicator is lit.
• According to the places and using methods, please replace the filter as long as feel there
is smell on filter or find it difficult to remove pollution and odor, even the filter replace indicator
is not glowing.
• In places of heavy smoking or using freshener, filter and unit body may have residual smell.
Please clean the unit body or replace filter when find odor around the air outlet.
• Filter’s validity time will shorten under following situation: Inhaling of oil fume, smoke or alcohol.
the embossment
filter replace reset
Dismantle the front cover and take out old filter
Replace method
• Hold the front cover on the bottom left and right
side with your hands (by the protrusions) Push
lightly towards you. When both the left and right
side of the cover is released, pull the cover up.
• Pull the filter towards yourself and take out old
filter.
• Take out new filter from bag, at the same
time,please notice the installing direction of
the combined filter, insert filter into machine
correctly. (white site of HEPA filter have to aim
inside).
• Replace the cover after inserting the new filter.
• First, insert the embossments of front cover
into the grooves which are on the upper part of
machine body
• After all above, push the lower part of front
cover until there is a “click” sound.
Resetting
• After cleaning and replacing filter, please insert the plug into socket but remain the unit turned
off, and then press the „
FILTER RESET
“. ( The filter ready button is inside the unit, it cannot be
reached with finger, please use a toothpick or other sharp object to push the filter ready button.)
• Please confirm the filter replace indicator is off, the machine start to accumulate replacement
period after the filter replace indicator is off. Please do not press the „
reset“
button except
replacing filter; otherwise, the machine cannot calculate the accumulated time correctly.
Caution
• If it is difficult to operate the machine buttons, maybe the front cover not installed correctly,
please reinstall the front cover. The embossments of front cover may not insert into the grooves
on the upper part of machine body correctly.
• Please be careful and pay attention to safety when you remove the front cover.
• Please contact with distributor or local maintenance center when you need new filter.